Laboratory Cabinet Design: Types, Dimensions and Storage Solutions
Release time:
2026-11-12
Laboratory Cabinet Design: Types, Dimensions and Storage Solutions
Introduction
Laboratory cabinet design plays an important role in creating an organized, safe, and efficient laboratory environment. Properly designed storage cabinets help laboratory personnel organize chemicals, instruments, glassware, equipment, and daily consumables while making the best use of available space.
Unlike ordinary storage furniture, laboratory cabinets must be selected according to specific working conditions, including chemical exposure, moisture, storage loads, cleaning requirements, and laboratory safety regulations.
Different laboratory applications require different cabinet configurations. Base cabinets provide convenient under-bench storage, wall cabinets maximize vertical space, tall cabinets accommodate larger equipment, and specialized chemical storage cabinets provide suitable storage for hazardous substances.
In this guide, we will introduce eight common types of laboratory cabinets, compare their structures and applications, explain standard dimensions and material options, and provide practical advice for choosing the right laboratory storage solutions.
1. What Is Laboratory Cabinet Design?
Laboratory cabinet design refers to the planning and configuration of storage furniture used in laboratories.
A well-designed laboratory cabinet should provide sufficient storage capacity while maintaining convenient access, structural stability, and compatibility with the laboratory environment.
Important design considerations include:
Material Selection: Steel, polypropylene (PP), stainless steel, and wood-based panels.
Storage Capacity: Cabinet dimensions, shelf arrangements, and drawer configurations.
Chemical Compatibility: Resistance to chemicals that may come into contact with cabinet surfaces.
Structural Strength: Suitable load-bearing capacity for stored materials.
Accessibility: Convenient door openings, drawer movement, and storage arrangements.
Safety: Appropriate chemical segregation, ventilation, locking systems, and installation.
Customization: Dimensions, colors, handles, hinges, and internal configurations.
Laboratory cabinets can be installed underneath workbenches, mounted on walls, or positioned independently as freestanding storage units.
2. Eight Types of Laboratory Cabinets
2.1 Laboratory Base Cabinets

Laboratory base cabinets are installed underneath laboratory worktops and are among the most common components of laboratory furniture systems.
They provide convenient storage for laboratory tools, equipment, consumables, and general supplies.
Main Features:
Available in single-door and double-door configurations.
Optional drawers and adjustable shelves.
Compatible with different laboratory worktop materials.
Available with adjustable leveling feet or plinth bases.
Can be integrated into wall benches and island benches.
Common Configurations:
Single-door base cabinet
Double-door base cabinet
Single-door single-drawer cabinet
Double-door double-drawer cabinet
Open storage cabinet
Sink base cabinet
Applications:
Chemistry laboratories
Educational laboratories
Pharmaceutical laboratories
Research laboratories
Quality control laboratories
Base cabinets can be customized according to the dimensions of the workbench and the storage requirements of the laboratory.
2.2 Laboratory Wall Cabinets

Laboratory wall cabinets are mounted above laboratory workbenches to maximize vertical storage space.
They are commonly used for storing laboratory glassware, lightweight equipment, documents, and frequently used consumables.
Main Features:
Wall-mounted construction.
Single-door or double-door options.
Optional transparent glass doors.
Adjustable internal shelves.
Different cabinet widths and heights.
Available in steel, PP, and wood-based materials.
Common Configurations:
All-steel wall cabinets
PP wall cabinets
Wooden wall cabinets
Glass-door wall cabinets
Open wall cabinets
Applications:
General chemistry laboratories
Educational laboratories
Research facilities
Instrument preparation areas
Wall cabinet installation requires suitable wall construction, mounting hardware, and load calculations. The supporting wall and anchors must be verified before installation, particularly for lightweight partition walls.
2.3 Laboratory Tall Cabinets

Laboratory tall cabinets are freestanding storage units designed to provide larger storage capacity.
They are suitable for storing laboratory equipment, instruments, consumables, and other materials that require vertical storage.
Main Features:
Full-height storage structure.
Single-door, double-door, or multi-door designs.
Adjustable internal shelves.
Optional glass doors.
Optional locking systems.
Available in steel, PP, and wood-based materials.
Common Configurations:
Full-height steel cabinet
PP tall storage cabinet
Glass-door tall cabinet
Instrument storage cabinet
General laboratory storage cabinet
Applications:
Research laboratories
Educational laboratories
Pharmaceutical facilities
Equipment storage rooms
General laboratory storage areas
Tall cabinets should be installed on a stable floor. Anti-tip arrangements may be necessary depending on cabinet height, depth, loading, and local safety requirements.
2.4 Laboratory Drawer Cabinets
Laboratory drawer cabinets are designed for organized storage of smaller laboratory items.
They are particularly useful for storing tools, instruments, accessories, stationery, and other frequently used supplies.
Main Features:
Multiple drawer configurations.
Smooth-running drawer slides.
Optional drawer locks.
Different drawer heights.
Optional internal dividers.
Compatible with laboratory workbench systems.
Common Configurations:
Three-drawer cabinet
Four-drawer cabinet
Five-drawer cabinet
Single-door and drawer combination
Mobile drawer cabinet
Applications:
Instrument laboratories
Research workstations
Educational laboratories
Sample preparation areas
General laboratory workbenches
Drawer dimensions and slide specifications should be selected according to the expected contents and loading requirements.
2.5 Mobile Laboratory Cabinets

Mobile laboratory cabinets are equipped with casters, allowing them to be moved between workstations when required.
They provide flexible storage for laboratories where working arrangements frequently change.
Main Features:
Lockable caster wheels.
Single-door, double-door, or drawer configurations.
Compact storage structure.
Optional handles.
Available in steel, PP, and other suitable materials.
Common Configurations:
Mobile drawer cabinet
Mobile single-door cabinet
Mobile double-door cabinet
Mobile instrument storage cabinet
Applications:
Research laboratories
Educational laboratories
Shared workstations
Flexible laboratory environments
Instrument preparation areas
Mobile cabinets should have appropriately rated wheels and a stable design. Heavy equipment should be secured, and the cabinet should be locked in position during use.
2.6 PP-Medicine-Cabinet
PP chemical storage cabinets are manufactured using polypropylene sheets and are commonly selected for storing compatible corrosive chemicals.
They offer good resistance to many acids and alkalis and are suitable for selected chemical storage environments.
Main Features:
Polypropylene cabinet construction.
Corrosion-resistant material.
Smooth and easy-to-clean surfaces.
Optional adjustable shelves.
Single-door or double-door configurations.
Optional locking systems.
Optional ventilation connections, where required by the chemical risk assessment.
Applications:
Acid storage areas
Chemical preparation rooms
Corrosive chemical laboratories
Wet laboratories
Chemical washing areas
PP cabinets are suitable for many compatible corrosive substances, but chemical compatibility must be checked against the actual chemicals, concentrations, and storage conditions.
They should not automatically be treated as suitable storage for flammable liquids or every type of hazardous chemical.
2.7 Acid Storage Cabinets

Acid storage cabinets are specially selected or designed for storing corrosive acidic chemicals.
Depending on the application, they may be manufactured using PP or other chemically compatible materials.
Main Features:
Chemical-compatible cabinet construction.
Corrosion-resistant internal surfaces.
Optional leak-containment trays.
Optional adjustable shelves.
Optional locking doors.
Optional ventilation connections.
Suitable internal configurations for segregated chemical storage.
Applications:
Chemistry laboratories
Analytical laboratories
Chemical preparation rooms
University laboratories
Industrial testing facilities
Important Design Considerations:
Confirm compatibility with the specific acids being stored.
Consider acid concentration and storage temperature.
Provide suitable secondary containment where required.
Separate incompatible chemicals.
Evaluate ventilation requirements.
Select appropriate shelving and cabinet materials.
Acid storage cabinets should be designed according to the chemical inventory and applicable storage requirements.
Hydrofluoric acid, nitric acid, sulfuric acid, and other corrosive substances may require different material compatibility assessments.
2.8 Laboratory Reagent Cabinets

Laboratory reagent cabinets are designed for organizing and storing laboratory reagents, bottles, and frequently used chemicals.
They can be installed above or below laboratory workbenches or supplied as independent storage units.
Main Features:
Adjustable shelving.
Optional glass doors.
Optional transparent viewing panels.
Multiple shelf configurations.
Available in steel, PP, and wood-based materials.
Optional lighting.
Optional ventilation according to storage requirements.
Common Configurations:
Wall-mounted reagent cabinet
Glass-door reagent cabinet
PP reagent cabinet
All-steel reagent cabinet
Open reagent shelf
Tall reagent storage cabinet
Applications:
Chemistry laboratories
Research facilities
Educational laboratories
Pharmaceutical laboratories
Analytical testing areas
Reagents must be stored according to their chemical compatibility and relevant safety requirements. A general reagent cabinet should not be assumed to provide the same protection as a dedicated corrosive or flammable storage cabinet.
3. Laboratory Cabinet Dimensions: Common Sizes and Design Guidelines
Laboratory cabinet dimensions depend on the available space, storage requirements, workbench configuration, and installation conditions.
The following table provides indicative dimensions for preliminary design.
| Cabinet Type | Width | Depth | Height |
|---|---|---|---|
| Base Cabinet | 400–1200 mm | 500–750 mm | 650–850 mm |
| Wall Cabinet | 400–1200 mm | 300–400 mm | 500–900 mm |
| Tall Cabinet | 600–1200 mm | 400–600 mm | 1800–2200 mm |
| Drawer Cabinet | 400–900 mm | 500–750 mm | 650–850 mm |
| Mobile Cabinet | 400–600 mm | 450–650 mm | 550–750 mm |
| PP Chemical Cabinet | 600–1200 mm | 400–600 mm | 800–1800 mm |
| Acid Storage Cabinet | Customized | Customized | Customized |
| Reagent Cabinet | 600–1200 mm | 300–600 mm | 600–1800 mm |
These are general planning ranges, not mandatory standard dimensions. Final dimensions should be confirmed against the cabinet design, door clearance, storage requirements, and laboratory layout.
3.1 Cabinet Width
Cabinet width should be selected according to the available installation space and required storage capacity.
Common widths include:
400 mm
450 mm
500 mm
600 mm
800 mm
900 mm
1000 mm
1200 mm
Smaller cabinets are suitable for compact storage, while wider cabinets provide more space for equipment and larger items.
3.2 Cabinet Depth
Cabinet depth depends on the stored items and installation location.
300–400 mm: Common for wall cabinets.
450–600 mm: Suitable for many freestanding storage cabinets.
600–750 mm: Common for laboratory base cabinets.
The final depth should also consider workbench dimensions and operator accessibility.
3.3 Cabinet Height
Different cabinet types require different heights.
Wall cabinets are generally designed to fit above workbenches, while tall cabinets provide greater vertical storage capacity.
The installation height of wall cabinets should maintain convenient access without obstructing laboratory operations.
4. Laboratory Cabinet Materials: Which Is Best?
Material selection is one of the most important factors in laboratory cabinet design.
Different materials provide different levels of chemical resistance, structural strength, moisture resistance, and maintenance requirements.
4.1 Steel Laboratory Cabinets
Steel cabinets are manufactured using cold-rolled steel sheets with suitable surface pretreatment and powder coating.
Advantages:
Good structural strength.
Suitable for modular cabinet systems.
Durable construction.
Flexible cabinet configurations.
Relatively easy to clean.
Good balance between performance and cost.
Limitations:
Damaged coatings may expose the steel to corrosion.
Not suitable for every corrosive chemical environment.
Surface coating requires proper maintenance.
Recommended Applications: General laboratories, educational laboratories, research facilities, and instrument storage areas.
4.2 PP Laboratory Cabinets
PP cabinets are manufactured using polypropylene sheets and suitable welding techniques.
Advantages:
Good resistance to many acids and alkalis.
Excellent moisture resistance.
No conventional steel rusting.
Smooth, easy-to-clean surfaces.
Suitable for selected corrosive chemical storage.
Limitations:
Lower structural stiffness than steel.
Limited temperature resistance.
Some organic solvents and oxidizing chemicals may damage PP.
Shelf loads require careful structural design.
Recommended Applications: Corrosive chemical areas, acid storage, chemical preparation rooms, and wet laboratories.
4.3 Wooden Laboratory Cabinets
Wood-based laboratory cabinets are commonly manufactured using MDF, particleboard, or plywood with protective surface finishes.
Advantages:
Attractive appearance.
Flexible colors and finishes.
Convenient cabinet customization.
Suitable for general-purpose storage.
Economical for selected applications.
Limitations:
Moisture may damage exposed edges and joints.
Chemical resistance depends on the surface finish.
Not suitable for demanding corrosive environments without specifically qualified protection.
Recommended Applications: Educational laboratories, dry storage areas, and general-purpose laboratory furniture.
4.4 Stainless Steel Laboratory Cabinets
Stainless steel cabinets are manufactured using corrosion-resistant stainless steel sheets and profiles.
Advantages:
Strong and durable construction.
Smooth, cleanable surfaces.
Good moisture resistance.
Suitable for hygienic environments.
No dependence on a powder-coated protective layer.
Limitations:
Higher initial cost.
Chloride exposure may cause corrosion.
Chemical compatibility depends on the stainless steel grade.
Recommended Applications: Pharmaceutical laboratories, medical research facilities, food testing laboratories, and wet preparation areas.
Laboratory Cabinet Material Comparison
| Property | Steel | PP | Wood | Stainless Steel |
|---|---|---|---|---|
| Structural Strength | High | Medium | Medium | High |
| Chemical Resistance | Coating-dependent | High for compatible chemicals | Finish-dependent | Grade-dependent |
| Moisture Resistance | Coating-dependent | Excellent | Limited to Good | Excellent |
| Corrosion Resistance | Coating-dependent | Does not rust | Not applicable | Good to Excellent |
| Cleanability | Good | Excellent | Finish-dependent | Excellent |
| Typical Cost | Moderate | Moderate to High | Low to Moderate | High |
5. How to Choose the Right Laboratory Cabinet?
The correct cabinet should match the intended storage function and laboratory operating environment.
5.1 General Laboratory Storage
For general laboratory supplies, instruments, and equipment:
Recommended: Powder-coated steel cabinets or suitable wooden cabinets.
These options provide flexible storage configurations and practical cost management.
5.2 Corrosive Chemical Storage
For selected acids and alkalis:
Recommended: PP chemical storage cabinets or other specifically compatible cabinet materials.
The selection should be based on the actual chemical inventory, concentrations, and storage conditions.
5.3 Laboratory Glassware Storage
For glassware, bottles, and laboratory accessories:
Recommended: Steel wall cabinets, glass-door cabinets, or reagent cabinets.
Adjustable shelves provide flexibility for different bottle and container sizes.
5.4 Instrument Storage
For precision instruments and laboratory equipment:
Recommended: Steel tall cabinets or customized storage cabinets.
Consider shelf load capacity, vibration sensitivity, dimensions, and environmental conditions.
5.5 Mobile Storage
For laboratories requiring flexible workstations:
Recommended: Mobile laboratory cabinets with locking casters.
These are useful for shared workspaces and laboratories with frequently changing arrangements.
5.6 Hygienic Storage Areas
For selected pharmaceutical and wet laboratory environments:
Recommended: Stainless steel cabinets.
Their smooth surfaces support cleaning and maintenance.
6. Laboratory Chemical Storage: Important Safety Considerations
Laboratory cabinet design must consider not only storage capacity but also chemical compatibility and safe segregation.
Different chemicals may react dangerously when stored together.
Important considerations include:
6.1 Separate Incompatible Chemicals
Chemicals should be segregated according to their compatibility.
For example:
Acids should generally be separated from bases.
Oxidizers should be separated from organic materials and other incompatible substances.
Flammable liquids require suitable dedicated storage arrangements.
Reactive chemicals require specific storage conditions.
6.2 Use Suitable Secondary Containment
Chemical storage cabinets may incorporate spill trays or bunded compartments to help contain accidental leakage.
The containment capacity should follow the applicable project and regulatory requirements.
6.3 Consider Ventilation Requirements
Some chemical storage applications may require ventilation.
However, cabinet ventilation should not be added automatically. The need, airflow arrangement, and exhaust destination should be determined by the stored chemicals and applicable safety requirements.
6.4 Select Compatible Shelves
Shelves should withstand the expected chemical exposure and stored loads.
For PP chemical storage cabinets, shelf thickness, support arrangement, and deflection under load should be verified.
6.5 Distinguish Different Chemical Storage Cabinets
Not all chemical storage cabinets provide the same protection.
Acid cabinets are designed for compatible corrosive substances.
Flammable liquid cabinets are designed for flammable liquid storage and may require specific fire-resistance testing.
General reagent cabinets provide organized storage but are not automatically suitable for hazardous chemical storage.
For example, EN 14470-1 is a standard for safety storage cabinets for flammable liquids. A general PP acid storage cabinet should not be represented as compliant with this standard without the required product design and certification.
7. Laboratory Cabinet Installation and Layout Planning
Proper installation helps ensure cabinet stability, accessibility, and efficient laboratory operation.
7.1 Base Cabinet Installation
Base cabinets are usually installed underneath laboratory worktops.
Important considerations include:
Leveling and alignment.
Worktop support.
Cabinet-to-cabinet connections.
Plumbing and electrical clearance.
Access to maintenance areas.
7.2 Wall Cabinet Installation
Wall cabinets must be securely attached to suitable supporting structures.
Before installation, confirm:
Wall construction material.
Anchor and fastener specifications.
Cabinet weight.
Expected stored load.
Mounting height.
Load distribution.
For lightweight partition walls, additional reinforcement may be required.
7.3 Tall Cabinet Installation
Tall cabinets should be installed on level floors and positioned to allow full door opening.
Depending on their design and loading conditions, suitable anti-tip arrangements may be necessary.
7.4 Mobile Cabinet Installation
Mobile cabinets should use appropriately rated casters.
Locking wheels help prevent unwanted movement during normal operation.
7.5 Laboratory Storage Layout
When planning a laboratory layout, consider:
Frequently used materials should be easily accessible.
Heavy items should generally be stored in lower compartments.
Hazardous chemicals should be stored in appropriate dedicated cabinets.
Wall cabinets should not obstruct equipment or operator movement.
Cabinet doors and drawers should not block circulation routes.
Emergency exits and safety equipment must remain accessible.
8. Customized Laboratory Cabinet Design
Standard cabinet dimensions may not meet every laboratory project's requirements.
Customized laboratory cabinets can be designed according to room dimensions, storage requirements, chemical applications, and furniture layouts.
8.1 Customized Dimensions
Cabinet width, depth, height, and internal compartment sizes can be adjusted according to project drawings.
8.2 Customized Colors
Cabinet bodies and doors can be supplied in different finishes and colors, depending on the selected material and coating system.
8.3 Customized Door Configurations
Available options include:
Single-door cabinets.
Double-door cabinets.
Glass-door cabinets.
Sliding-door cabinets.
Drawer and door combinations.
8.4 Customized Internal Storage
Internal arrangements may include:
Adjustable shelves.
Fixed shelves.
Dividers.
Pull-out trays.
Spill containment trays.
Specialized storage compartments.
8.5 Customized Hardware
Options include:
Stainless steel handles.
Linear handles.
Concealed handles.
Self-closing hinges.
Locking systems.
Drawer slides.
A complete cabinet design should coordinate its material, dimensions, hardware, storage function, and installation requirements.
9. Why Choose BEST LAB Laboratory Cabinets?
BEST LAB provides customized laboratory cabinet solutions for universities, research institutions, pharmaceutical facilities, industrial laboratories, and testing centers.
Complete Cabinet Product Range
Our laboratory cabinet products include:
Laboratory Base Cabinets
Laboratory Wall Cabinets
Laboratory Tall Cabinets
Laboratory Drawer Cabinets
Mobile Laboratory Cabinets
PP Chemical Storage Cabinets
Acid Storage Cabinets
Laboratory Reagent Cabinets
Multiple Material Options
Available cabinet materials include:
Powder-Coated Steel
Polypropylene (PP)
Wood-Based Panels
Stainless Steel
Flexible Customization
We provide customized:
Cabinet dimensions.
Door and drawer configurations.
Internal shelf arrangements.
Colors and surface finishes.
Handles and hinges.
Locking systems.
Ventilation and containment features where appropriate.
Complete Laboratory Furniture Solutions
In addition to storage cabinets, BEST LAB supplies laboratory workbenches, fume hoods, countertops, reagent shelves, sinks, and other laboratory furniture.
Technical Design Support
We can provide product drawings, technical specifications, and 3D renderings to help customers confirm cabinet configurations before manufacturing.
Looking for customized laboratory storage cabinets?
Contact BEST LAB to discuss your storage requirements and request a customized laboratory cabinet proposal.
Conclusion
Laboratory cabinet design is an important part of laboratory planning and furniture selection.
From base cabinets and wall cabinets to tall cabinets, drawer cabinets, mobile cabinets, and specialized chemical storage systems, each cabinet type serves a different purpose.
Selecting the right cabinet material is equally important. Steel provides structural strength for general laboratory applications, PP is suitable for many compatible corrosive environments, wood-based cabinets offer practical storage solutions for selected dry areas, and stainless steel is useful for hygienic and wet environments.
By considering cabinet dimensions, storage capacity, chemical compatibility, installation conditions, and safety requirements, laboratories can create efficient and organized storage systems.
BEST LAB provides customized laboratory cabinets and complete laboratory furniture solutions for different laboratory applications.
Contact BEST LAB for laboratory cabinet designs, technical specifications, and customized quotations.
Frequently Asked Questions
1. What are the different types of laboratory cabinets?
Common types include base cabinets, wall cabinets, tall cabinets, drawer cabinets, mobile cabinets, PP chemical storage cabinets, acid storage cabinets, and reagent cabinets.
2. What material is best for laboratory cabinets?
Powder-coated steel is suitable for many general laboratories, PP is useful for many compatible corrosive chemical applications, stainless steel is suitable for selected hygienic environments, and wood-based panels can be used in selected dry areas.
3. What is the standard size of a laboratory base cabinet?
Common base cabinet depths are approximately 500–750 mm, with heights typically around 650–850 mm. Widths vary according to the furniture configuration and project requirements.
4. What is the difference between a laboratory base cabinet and a wall cabinet?
Base cabinets are installed underneath laboratory worktops, while wall cabinets are mounted above workbenches to provide additional vertical storage.
5. What is a PP chemical storage cabinet?
A PP chemical storage cabinet is manufactured using polypropylene and is suitable for storing many compatible corrosive chemicals, including selected acids and alkalis.
6. Are acid storage cabinets the same as flammable storage cabinets?
No. Acid cabinets are designed for compatible corrosive substances, while flammable storage cabinets are designed for flammable liquids and may require specific fire-resistance testing and certification.
7. Can laboratory cabinets be customized?
Yes. Cabinet dimensions, materials, colors, doors, drawers, shelves, handles, hinges, and locking systems can be customized according to project requirements.
8. Are laboratory wall cabinets suitable for partition walls?
They can be installed on suitable partition walls if the wall construction, reinforcement, anchors, and expected loads have been properly evaluated.
9. What are mobile laboratory cabinets used for?
Mobile cabinets provide flexible storage and can be moved between laboratory workstations. They are useful in shared and frequently reconfigured laboratory environments.
10. Does BEST LAB provide complete laboratory cabinet solutions?
Yes. BEST LAB supplies steel, PP, wooden, and stainless steel laboratory cabinets, including base cabinets, wall cabinets, tall cabinets, chemical storage cabinets, and customized storage systems.
Follow Us
Any Questions? Get In Touch.
We Can Recommend Suitable Products According To Your Needs.
Other Blogs
