Laboratory Furniture Materials: Steel, PP, Wood and Stainless Steel Compared
Release time:
2026-11-12
Laboratory Furniture Materials: Steel, PP, Wood and Stainless Steel Compared
Introduction
Choosing the right laboratory furniture materials is essential for creating a safe, durable, and functional laboratory environment.
Laboratory furniture must withstand different working conditions, including chemical exposure, moisture, frequent cleaning, mechanical loads, and daily use. Different materials offer different advantages, making material selection an important part of laboratory design and procurement.
Common laboratory furniture materials include powder-coated steel, polypropylene (PP), wood-based panels, and stainless steel. Each material has different characteristics in terms of chemical resistance, structural strength, corrosion resistance, maintenance, and cost.
For example, steel laboratory furniture is widely used in general-purpose laboratories, while PP furniture is particularly suitable for many corrosive chemical environments. Stainless steel is often selected for hygienic and wet areas, whereas wood-based furniture can be a practical solution for educational and low-chemical-exposure environments.
In this guide, we will compare four common laboratory furniture materials, explain their advantages and limitations, and help you select the most suitable material for your laboratory project.
1. What Are Laboratory Furniture Materials?

Laboratory furniture materials refer to the materials used to manufacture laboratory cabinets, supporting structures, storage systems, workbenches, and other laboratory equipment.
Unlike ordinary office furniture, laboratory furniture must be designed according to specific environmental and operational requirements.
Important material properties include:
Chemical Resistance: Ability to withstand exposure to laboratory chemicals.
Corrosion Resistance: Resistance to rust, oxidation, and chemical deterioration.
Moisture Resistance: Ability to withstand humidity, water, and frequent cleaning.
Structural Strength: Ability to support laboratory equipment and stored materials.
Durability: Resistance to daily wear, impact, and mechanical damage.
Cleanability: Ease of cleaning and maintaining hygienic surfaces.
Maintenance Requirements: Long-term care and repair requirements.
The best material depends on the laboratory's application, chemical exposure, operating conditions, and budget.
2. Steel Laboratory Furniture

2.1 What Is Steel Laboratory Furniture?
Steel laboratory furniture is commonly manufactured using cold-rolled steel sheets, fabricated into cabinet bodies, doors, drawers, and supporting structures.
The metal surfaces typically undergo pretreatment processes, such as cleaning and phosphating, followed by electrostatic powder coating and curing to create a protective finish.
This construction provides a strong and durable cabinet system suitable for many general laboratory applications.
2.2 Key Features and Advantages
1. Strong Structural Performance
Steel provides good mechanical strength and is suitable for supporting laboratory countertops, equipment, and storage loads when properly designed.
2. Protective Surface Coating
Epoxy or other suitable powder-coated finishes help protect the steel surface against corrosion, scratches, and everyday wear.
3. Modular Design
Steel cabinets can be manufactured in different configurations, including:
Base cabinets
Wall cabinets
Tall cabinets
Drawer cabinets
Mobile cabinets
Laboratory island benches
4. Easy Maintenance
Smooth powder-coated surfaces are relatively easy to clean and maintain.
5. Cost-Effective Solution
Steel laboratory furniture provides a practical balance between structural strength, durability, and manufacturing cost.
2.3 Limitations
Damaged powder coating may expose the underlying steel to corrosion.
Not suitable for continuous exposure to aggressive corrosive chemicals without appropriate protection.
Surface scratches and coating deterioration require maintenance.
Requires suitable surface pretreatment and coating quality.
2.4 Recommended Applications
Steel laboratory furniture is commonly suitable for:
General chemistry laboratories
Educational laboratories
Physical testing laboratories
Research laboratories
Quality control laboratories
Instrument laboratories
General-purpose laboratory storage
BEST LAB Solution: Powder-coated steel laboratory benches and cabinets can be customized with epoxy resin, phenolic resin, ceramic, or other suitable worktop materials.
3. PP Laboratory Furniture

3.1 What Is PP Laboratory Furniture?
PP laboratory furniture is manufactured using polypropylene, a thermoplastic polymer widely used in chemical laboratories.
PP cabinet bodies are commonly fabricated from polypropylene sheets joined through suitable welding processes.
This material is particularly useful in environments where resistance to many corrosive chemicals and moisture is important.
3.2 Key Features and Advantages
1. Excellent Resistance to Many Corrosive Chemicals
PP offers good resistance to many acids, alkalis, and salt solutions.
It is commonly selected for laboratories handling compatible corrosive substances.
2. Excellent Moisture Resistance
Unlike conventional steel furniture, PP does not rust when exposed to water and humid conditions.
3. Easy to Clean
Its smooth, non-porous surface is convenient for cleaning and routine maintenance.
4. Suitable for Corrosive Environments
PP furniture can be used in selected acid preparation areas, chemical storage areas, and washing areas.
5. Integrated Construction
PP cabinets, shelves, sinks, and worktops can be manufactured using compatible polypropylene materials.
3.3 Limitations
Lower structural stiffness than steel.
Load-bearing capacity requires careful structural design.
Limited resistance to elevated temperatures.
Some organic solvents and strong oxidizing chemicals may damage PP.
Large PP cabinets may require additional reinforcement or support.
Chemical compatibility should always be verified against the actual chemical, concentration, temperature, and exposure duration. <Cite refs={["turn137799view3","turn561651search12"]}/>
3.4 Recommended Applications
PP laboratory furniture is suitable for selected applications in:
Chemical laboratories
Acid preparation rooms
Corrosive chemical storage areas
Wet laboratories
Chemical washing areas
Laboratory fume hood installations
BEST LAB Solution: PP laboratory benches, PP base cabinets, PP wall cabinets, PP chemical storage cabinets, and PP fume hood systems.
4. Wooden Laboratory Furniture
4.1 What Is Wooden Laboratory Furniture?
Wooden laboratory furniture is commonly manufactured using engineered wood panels, such as MDF, particleboard, or plywood, with protective surface finishes.
Common surface treatments include:
Melamine laminate
High-pressure laminate (HPL)
Chemical-resistant coatings
PVC edge banding
Solid hardwood may also be used for selected laboratory furniture applications.
Properly designed laboratory-grade wood casework can provide a practical and attractive solution for environments with limited chemical exposure.
4.2 Key Features and Advantages
1. Attractive Appearance
Wood-based laboratory furniture offers a clean and professional appearance with different colors and surface finishes.
2. Flexible Customization
Cabinet dimensions, door styles, colors, and storage configurations can be customized easily.
3. Cost-Effective Manufacturing
Wood-based panels can provide an economical solution for selected laboratory furniture applications.
4. Convenient Cabinet Design
Wooden cabinets are suitable for different configurations, including drawers, doors, shelves, and storage compartments.
5. Suitable for General Laboratory Environments
When properly finished and protected, wood-based laboratory furniture can be used in educational laboratories, offices, and general-purpose work areas.
4.3 Limitations
Moisture can penetrate damaged edges and joints.
Not ideal for continuous exposure to water.
Chemical resistance depends heavily on the surface finish.
Damaged laminate or edge sealing may allow moisture penetration.
Not recommended for demanding corrosive chemical environments without a specifically qualified construction.
Laboratory-grade wood casework should use suitable core materials, protective finishes, and properly sealed edges. Smithsonian design guidance also identifies hardwood as an option for laboratory applications without heavy corrosive chemical use. <Cite refs={["turn851880view1","turn851880view0"]}/>
4.4 Recommended Applications
Wooden laboratory furniture is suitable for selected:
Educational laboratories
General teaching laboratories
Laboratory offices
Dry preparation areas
Instrument storage areas
General-purpose laboratory storage
BEST LAB Solution: Wooden wall cabinets, wooden base cabinets, and customized wooden laboratory storage systems with melamine or other suitable protective finishes.
5. Stainless Steel Laboratory Furniture

5.1 What Is Stainless Steel Laboratory Furniture?
Stainless steel laboratory furniture is manufactured using corrosion-resistant stainless steel sheets and profiles.
Common grades include:
SUS 304
SUS 316
SUS 316L
The appropriate grade depends on the chemicals, moisture, cleaning agents, and environmental conditions.
Stainless steel is widely selected for laboratory environments requiring smooth, cleanable surfaces and good mechanical durability.
5.2 Key Features and Advantages
1. Good Corrosion Resistance
Stainless steel offers good corrosion resistance in many laboratory environments when the appropriate grade is selected.
2. Excellent Cleanability
Smooth stainless steel surfaces are easy to clean and suitable for environments requiring frequent sanitation.
3. High Mechanical Strength
Stainless steel provides good structural strength for laboratory workbenches, storage cabinets, and equipment tables.
4. Moisture Resistance
Unlike ordinary carbon steel, stainless steel does not require a protective powder coating to provide its basic corrosion resistance.
5. Hygienic Surface
Stainless steel is commonly used in pharmaceutical, food testing, and other hygiene-focused environments.
5.3 Limitations
Higher initial material and manufacturing costs.
Some chemical environments may cause pitting or corrosion.
Chloride-containing cleaning agents require special attention.
Surface scratches may affect appearance.
Welding, fabrication, and surface finishing require appropriate quality control.
Important: Stainless steel 316/316L is not universally resistant to acids. Both 304 and 316 should be considered unsuitable for hydrochloric acid exposure under the conditions described by the British Stainless Steel Association. <Cite refs={["turn137799view4","turn397133search55"]}/>
5.4 Recommended Applications
Stainless steel laboratory furniture is suitable for:
Pharmaceutical laboratories
Medical research facilities
Food testing laboratories
Cleanroom environments
Wet laboratories
Sample preparation areas
Glassware washing areas
BEST LAB Solution: Stainless steel laboratory workbenches, stainless steel cabinets, sink benches, mobile cabinets, and customized stainless steel workstations.
6. Laboratory Furniture Materials Comparison
Understanding the differences between materials helps laboratory owners and procurement teams make better purchasing decisions.
| Performance | Steel | PP | Wood | Stainless Steel |
|---|---|---|---|---|
| Structural Strength | High | Medium | Medium | High |
| Chemical Resistance | Depends on coating | High for compatible chemicals | Depends on finish | Depends on grade |
| Moisture Resistance | Depends on coating | Excellent | Limited to Good | Excellent |
| Corrosion Resistance | Coating-dependent | Does not rust | Not applicable to wood itself | Good to Excellent |
| Heat Resistance | Good | Limited | Limited | Good |
| Cleanability | Good | Excellent | Finish-dependent | Excellent |
| Maintenance | Moderate | Low to Moderate | Moderate | Low to Moderate |
| Initial Cost | Moderate | Moderate to High | Low to Moderate | High |
| Typical Application | General laboratories | Corrosive chemical areas | Dry and general-purpose areas | Wet and hygienic areas |
The ratings are general material-selection guidance. Actual performance depends on the construction, surface treatment, chemical exposure, and manufacturer specifications.
7. Which Laboratory Furniture Material Is Best for Different Applications?
There is no single material that is best for every laboratory.
The following recommendations can help guide material selection.
7.1 General Chemistry Laboratories
Recommended: Powder-Coated Steel Furniture
Steel cabinets provide good structural support and flexible storage configurations.
For countertops, consider epoxy resin, phenolic resin, or ceramic depending on the chemicals handled.
7.2 Strong Acid and Alkali Laboratories
Recommended: PP Laboratory Furniture
PP is suitable for many corrosive chemical applications where conventional coated steel or wood-based furniture may not provide sufficient resistance.
However, verify the compatibility of PP with the specific chemical mixture, particularly organic solvents and strong oxidizing agents.
7.3 Pharmaceutical Laboratories
Recommended: Stainless Steel or Suitable Steel Furniture
Stainless steel is often preferred in areas requiring frequent cleaning and hygienic surfaces.
Other areas may use powder-coated steel cabinets with suitable worktops, depending on the process and hygiene requirements.
7.4 Educational Laboratories
Recommended: Powder-Coated Steel or Wooden Laboratory Furniture
Steel furniture is suitable for durable student workstations and general laboratory operations.
Wood-based furniture may be considered for dry teaching areas and storage spaces with limited chemical exposure.
7.5 Wet Laboratories
Recommended: PP or Stainless Steel
PP is suitable for many compatible corrosive chemical applications, while stainless steel is useful for selected washing and hygienic areas.
The correct choice depends on the cleaning agents, chemical exposure, and operating environment.
7.6 Cleanroom and Hygienic Environments
Recommended: Stainless Steel
Stainless steel is commonly considered where smooth, cleanable surfaces and controlled hygiene are important.
The furniture design should also minimize inaccessible gaps, crevices, and contamination traps.
8. Can Different Laboratory Furniture Materials Be Combined?
Yes. Combining different materials is often a practical way to balance structural performance, chemical resistance, appearance, and budget.
For example:
Option 1: Steel Cabinet + Epoxy Resin Worktop
Suitable for general chemistry and research laboratories.
Strong steel cabinet structure.
Durable epoxy resin working surface.
Flexible cabinet and drawer configurations.
Option 2: PP Cabinet + PP Worktop
Suitable for selected corrosive chemical environments.
PP cabinet body.
Compatible PP worktop.
Good resistance to many acids and alkalis.
Option 3: Stainless Steel Cabinet + Stainless Steel Worktop
Suitable for selected hygienic and wet laboratory applications.
Stainless steel construction.
Smooth working surfaces.
Easy-to-clean cabinet structure.
Option 4: Steel Frame + Wooden Cabinet Panels
Suitable for selected general-purpose laboratory environments.
Steel supporting structure.
Wood-based cabinet panels.
Flexible color and cabinet configurations.
The important point is that the worktop, cabinet body, supporting frame, and accessories should be specified separately rather than assuming that one material must be used throughout the entire workstation.
9. Important Factors When Purchasing Laboratory Furniture
Before selecting a laboratory furniture manufacturer, consider the following factors.
9.1 Laboratory Application
Identify the laboratory activities, chemical reagents, equipment, and operating conditions.
9.2 Material Specifications
Confirm:
Cabinet material
Sheet thickness
Supporting frame construction
Surface coating
Edge sealing
Welding quality
Hardware materials
9.3 Chemical Compatibility
Request chemical compatibility information for the selected materials.
Do not rely only on general descriptions such as chemical-resistant or corrosion-resistant.
9.4 Load-Bearing Capacity
Confirm that cabinets, shelves, and workbench structures can support the expected loads.
9.5 Cleaning and Maintenance
Select surfaces and cabinet configurations that can be cleaned and maintained according to laboratory procedures.
9.6 Standards and Testing
For laboratory-grade casework, project specifications may reference the relevant SEFA standards:
SEFA 8-M: Metal Casework
SEFA 8-P: Polypropylene Casework
SEFA 8-W: Wood Casework
The applicable edition and test documentation should be confirmed with the manufacturer. SEFA publishes separate material-specific standards rather than treating all laboratory casework as one material category. <Cite refs={["turn137799view0","turn561651search12","turn561651search14"]}/>
10. Why Choose BEST LAB Laboratory Furniture?
BEST LAB provides customized laboratory furniture solutions for universities, research institutions, pharmaceutical facilities, industrial laboratories, and testing centers.
Multiple Material Options
Our laboratory furniture is available in:
Powder-Coated Steel
Polypropylene (PP)
Wood-Based Panels
Stainless Steel
Complete Product Range
BEST LAB supplies:
Laboratory Base Cabinets
Laboratory Wall Cabinets
Laboratory Tall Cabinets
Laboratory Drawer Cabinets
Mobile Laboratory Cabinets
PP Chemical Storage Cabinets
Acid Storage Cabinets
Stainless Steel Laboratory Furniture
Laboratory Workbenches
Laboratory Fume Hoods
Customized Design
We provide flexible customization according to project requirements, including:
Cabinet dimensions
Door and drawer configurations
Frame structures
Surface finishes
Cabinet colors
Worktop materials
Handles and hardware
Integrated laboratory accessories
Technical Design Support
Our team can provide technical drawings, material recommendations, and 3D laboratory renderings to help customers confirm their furniture specifications before manufacturing.
Complete Laboratory Solutions
From individual laboratory workbenches to complete laboratory furniture projects, BEST LAB provides coordinated furniture solutions for different laboratory applications.
Contact BEST LAB to discuss your laboratory furniture requirements and request a customized quotation.
Conclusion
Selecting the right laboratory furniture material is essential for achieving the desired balance between durability, chemical resistance, maintenance, and project cost.
Powder-coated steel is a practical choice for many general laboratories. PP is suitable for many corrosive chemical environments. Wood-based furniture can be used in selected dry and low-chemical-exposure areas, while stainless steel is particularly useful for hygienic and wet applications.
The best solution depends on the actual laboratory environment rather than the material alone.
By evaluating chemical exposure, structural requirements, moisture conditions, and maintenance needs, laboratory owners can select furniture that supports long-term laboratory operations.
BEST LAB provides customized steel, PP, wooden, and stainless steel laboratory furniture to meet different project requirements.
Looking for a reliable laboratory furniture manufacturer?
Contact BEST LAB for customized laboratory workbenches, cabinets, storage systems, and complete laboratory furniture solutions.
Frequently Asked Questions
1. What are the most common materials used in laboratory furniture?
The most common materials include powder-coated steel, polypropylene (PP), wood-based panels, and stainless steel. The choice depends on laboratory applications and environmental conditions.
2. Which material is best for laboratory cabinets?
Powder-coated steel is suitable for many general laboratories. PP is often selected for compatible corrosive chemical environments, while stainless steel is preferred for selected wet and hygienic applications.
3. Is PP better than steel for laboratory furniture?
Neither material is universally better. PP offers excellent resistance to many compatible corrosive chemicals, while steel provides greater structural stiffness and is suitable for many general laboratory applications.
4. Is wooden laboratory furniture suitable for chemistry laboratories?
Wood-based laboratory furniture can be used in selected chemistry teaching and general-purpose areas with limited chemical exposure. It should not be used in demanding corrosive or frequently wet environments without specifically qualified protective construction.
5. What is the difference between 304 and 316 stainless steel laboratory furniture?
Grade 316 contains molybdenum and generally provides better resistance to many chloride-containing environments than 304. However, neither grade is suitable for hydrochloric acid exposure under typical conditions.
6. Does powder-coated steel laboratory furniture rust?
The powder coating provides a protective barrier against corrosion. However, scratches, coating damage, and poor surface preparation may expose the underlying steel and lead to rust.
7. Is polypropylene laboratory furniture suitable for strong acids?
PP is resistant to many acids, but compatibility depends on acid type, concentration, temperature, and exposure duration. Strong oxidizing chemicals and some organic solvents require particular attention.
8. Which laboratory furniture material is easiest to clean?
Stainless steel and PP generally offer smooth, easy-to-clean surfaces. Powder-coated steel is also easy to maintain when its coating remains intact.
9. Can laboratory furniture use different materials in one workstation?
Yes. For example, a workstation can combine a powder-coated steel cabinet structure with an epoxy resin worktop or use PP cabinets with a compatible PP worktop.
10. Does BEST LAB provide customized laboratory furniture?
Yes. BEST LAB provides customized steel, PP, wood-based, and stainless steel laboratory furniture, including workbenches, storage cabinets, and complete laboratory furniture solutions.
Follow Us
Any Questions? Get In Touch.
We Can Recommend Suitable Products According To Your Needs.
Other Blogs